Flaps

Flaps are assembled and I'm match drilling.

We fabricated the wood cradles to support the flaps in an upright position while working.

Match drilling has been completed and I'm deburring the parts.  The back skins are final drilled for #33 pop rivets making deburring of those holes unnecessary.  Knowing this would have saved me at least a half hour of mindless work.

Parts are all out and ready to prime.  The only pieces not shown here are the skins.

I'm cleaning the skins in preparation for priming.

 Here are all the parts after priming.

Final assembly of the ribs and spars begins.

The nose skins are coming on here.

I'm sealing the trailing edge with tank sealant.

The top skins are buck riveted, while the bottom skins are pop riveted.

Here I am after the trailing edge has dried getting ready to rivet.

The flaps are done and with that the wings are done!  This is a momentous occasion as the flaps are the last pieces that I will construct.  With the quickbuild fuselage, I will be moving into the exciting assembly phase.

 

 
 

Flaps are attached.